Make a simple shade sail for your garden

 

Shed makeover after 1

If you enjoyed the recent post on my allotment shed makeover, you might remember I promised more details on how to make the shade sail, or awning, for the shed. So, I have put together a quick step by step tutorial for you! The shade sail is perfect for creating some shade in your outdoors space, and is incredibly easy to put together, so why not have a go! It’s definitely achievable in a few hours, so the perfect kind of weekend DIY project. Here is what you will need to gather together to make the shade sail:

Materials

Fabric – canvas, hessian or other heavy fabric – measured to the size of your shed

Eyelets and washers – I used 4 x 11mm washers (you can find them in Hobbycraft, Amazon, eBay)

Cotton in a similar shade to your fabric

Pins – plenty of them!

IMG_6714

Before shopping for fabric, measure up the space where your shade sail will be – if it’s going to be attached to a shed, just measure the width of the shed and then add a few centimetres for seam allowances (I added 5cm on each side).

IMG_6718

Once you have measured and cut the fabric, fold the edges over, one side at a time, to make seams. I folded mine over twice to make them stronger. Then pin the fabric in place to hold it. My fabric was quite thick, especially once folder, so I pinned every few centimetres.

IMG_6716

Set your iron on the hottest setting, and add steam if you can, to press the seams. This straightens up the edges and make the whole project look lot neater, as well as holding the seams in place.

IMG_6720

Next, sew along the seams, around 1cm from the inside edge, using a medium style stitch on the sewing machine. At the start and end of the fabric I sewed backwards and forwards a few times, just to strenghten the join.

I hemmed and sewed the sides of the fabric in opposite pairs, so the two length sides and then the two width sides – if that makes sense!

IMG_6724

Once all of the edges are folded, ironed and hemmed with the machine, it’s time to add the eyelets and washers to all four corners.

IMG_6726

This part is great fun, and involves hitting the eyelet making tool with a hammer to make a circular hole in the fabric, and then adding the eyelet and washer pair into the fabric. There are lots of great tutorials on Youtube for this process – it’s definitely easier to watch how it’s done!

IMG_6721

Once the eyelets and washers are in place for each corner, the shade sail is ready for fixing to the shed. I used natural jute rope, as it coordinated well with the fabric, and was strong enough to hold the shade sail to the fixings. I hammered two tacks into the roof of the shed, one in each front corner of roof trim, and then looped the ropeĀ  from the top two eyelets over these. The bottom two eyelets and rope were supported by garden canes, and another length of rope stretched as a guy rope to a tent peg in each corner.

DSC_0296-2

The shade sail is going to perfect at the allotment over the summer, and I am looking forward to enjoying many cups of tea relaxing underneath it!

I would love to see your shade sail, or summer DIY projects, if you fancy sharing! And of course, let me know if you have any questions about the tutorial.

 

 

Save

Save

Save

Save

Facebooktwittergoogle_plusredditpinterestlinkedinmail

One thought on “Make a simple shade sail for your garden

Leave a Reply

Your email address will not be published. Required fields are marked *